The control scale and complexity of the process control system 1. According to the control scale and complexity of the process control system For different metallurgical production processes, the control scale and complexity of the process control system are different. Usually, DCS is preferred when the process control system is large in scale and high in complexity. Because the system is develope...
The basis of the FCS system is a digital intelligent field device. The digital intelligent field device is the hardware support and foundation of the FCS system. The reason is very simple. The FCS system implements the two-way digital communication field bus signal system between the automatic control device and the field device. If the field device does not follow the unified ...
Reducing information round trips and reducing system cabling Reducing information round trips and reducing system cabling are sometimes at odds with each other. At this time, the principle of saving investment should still be used as the choice. If the response time of the selected system allows, a cable-saving solution should be selected. If the response time of the selected system is rela...
A power plant, 2×300MW coal-fired units The thermal system is a unit system . Each unit is equipped with a centralized control building, which adopts the centralized control mode of machine , furnace and electric unit . The elevation of the unit control room is 12.6m, which is consistent with the elevation of the operation floor . DCS adopts WDPF-Ⅱ, and the I/O points designed for eac...