b r x20bc0087 bus controller

Processing of power supply by PLC
Nov 03 , 2022

Processing of power supply by PLC Power supply is one of the main ways for interference to enter the programmable controller. Power supply interference is mainly generated by impedance coupling of power supply lines, and various high-power electrical equipment is the main source of interference. In situations with strong interference or high reliability requirements. A shielded isolation tra...

Tags : Allen Bradley 1794-IB16 Flex Input Module B&R X20BM05 Bus Module Siemens 6ES7132-4BD02-0AA0 ET 200S Electronic Module
View More
The low-pass filter can absorb most of the " burrs " of the power supply
Nov 10 , 2022

The low-pass filter can absorb most of the " burrs " of the power supply . L1 and L2 in the figure are used to suppress high-frequency differential mode voltage . L1 and L2 are reversely wound on the same magnetic ring with equal-length wires , 50HZ The magnetic fluxes generated by the power frequency current in the magnetic ring cancel each other out, and the magnetic ring will not be saturated.&...

Tags : Allen Bradley 1756-L71S GuardLogix Controller Siemens 6ES7134-4GB01-0AB0 ET200S Electronics Module B&R X20CP1585 CPU New
View More
The working principle of the PLC system
Nov 24 , 2022

The working principle of the system The body of the volumetric tube is a closed volumetric standard made of steel pipes. Its basic volume value refers to the volume of the pipe section between the start detection switch D1 and the end detection switch D2. The volume value is measured by the authorized unit of the State Bureau of Technical Supervision in accordance with the national verification re...

Tags : Siemens 6ES7307-1EA01-0AA0 Power Supply Module B&R X20BM31 Bus Module Allen Bradley 1747-L543 SLC 500 Processor
View More
The control scale and complexity of the process control system
Dec 22 , 2022

The control scale and complexity of the process control system 1. According to the control scale and complexity of the process control system For different metallurgical production processes, the control scale and complexity of the process control system are different. Usually, DCS is preferred when the process control system is large in scale and high in complexity. Because the system is develope...

Tags : Allen Bradley 1756-PB75R Redundant Power Supply B&R Br X20bc0083 Bus Controller Ethernet Powerlink Siemens 6ES7350-1AH03-0AE0 SIMATIC S7-300 Counter Module
View More
Power supply`s running in PLC module
Feb 02 , 2023

Power supply`s running in PLC module The low-pass filter can absorb most of the " burrs " of the power supply .L1 and L2 in the figure are used to suppress high-frequency differential mode voltage . L1 and L2 are reversely wound on the same magnetic ring with equal length wires , The magnetic flux generated by the power frequency current in the magnetic ring cancels each other, and the m...

Tags : Siemens 6ES7322-1BL00-0AA0 SIMATIC S7-300 Digital Output Module B&R X20DC2396 Controller Counter Module Allen Bradley 1756-ENBT Ethernet I/P Communication Module
View More
The difference between the three major control systems of DCS, PLC and FCS
Feb 21 , 2023

The difference between the three major control systems of DCS, PLC and FCS We already know that FCS is developed from DCS (Siemens 6ES7322-1HH01-0AA0 SIMATIC S7-300 Digital Output Module) and PLC(Allen Bradley 1785-L60B Enhanced Ethernet Controller). FCS (B&R X20CS1070 Communication Module)not only has the characteristics of DCS and PLC, but also takes a revolutionary st...

Tags : Siemens 6ES7322-1HH01-0AA0 SIMATIC S7-300 Digital Output Module Allen Bradley 1785-L60B Enhanced Ethernet Controller B&R X20CS1070 Communication Module
View More
The basis of the FCS system is a digital intelligent field device.
Mar 12 , 2023

The basis of the FCS system is a digital intelligent field device. The digital intelligent field device is the hardware support and foundation of the FCS system. The reason is very simple. The FCS system implements the two-way digital communication field bus signal system between the automatic control device and the field device. If the field device does not follow the unified ...

Tags : B&R X20BB81 Bus Module Allen Bradley 1747-L541 SLC 500 Controller Siemens 6ES7414-4HM14-0AB0 SIMATIC S7-400H CPU
View More
Reducing information round trips and reducing system cabling
Mar 23 , 2023

Reducing information round trips and reducing system cabling Reducing information round trips and reducing system cabling are sometimes at odds with each other. At this time, the principle of saving investment should still be used as the choice. If the response time of the selected system allows, a cable-saving solution should be selected. If the response time of the selected system is rela...

Tags : Siemens 6ES7422-1BL00-0aa0 SIMATIC S7-400 Digital Output Module B&R X20BB80 Bus Module Allen Bradley 1794-OB16 Output Module
View More

1 2 3

A total of 3 pages

Search